Skip to main content

Pass only 1st-degree connections

Nick
Updated

Main info

There could be many cases when you need to filter those profiles who accepted your invitations from those who did not, or simply get 1st-degree connections out of a LinkedIn profiles URLs list. This can be helpful for Sellers who want to send a follow-up to those who accepted the invitation.

Pass only 1st-degree connections action does exactly what you need: it takes a list of profiles from the Queue, goes to My Network page, fetches profiles from that page, and seeks for matches. If there is a match, then it means the profile in the Queue is your 1st-degree contact, hence it is moved from Queue to Successful list. If no match for a profile from Queue is found, then it means the profile is not your 1st-degree contact, hence it stays in the Queue till the next iteration.

mceclip0.png

mceclip1.png

 

General tab

You can set up Timeout between checks - the time during which the Action will be sleeping before proceeding with the next iteration. You can limit an action to 50 profiles per day.

mceclip2.png

 

Enhance this action with:point_right::

 

How it works

In order to better understand how it works, let's take a look at the following example: we invited five profiles, one the next day after another: profile A was invited on January 11, 2020 profile B was invited on January 12, 2020, etc. Every profile accepted the invitation ten days later: profile A became 1st connection on January 21, 2020, profile B became 1st connection on January 22, 2020, etc. Pass only 1st-degree connections Action was already executed once on January 22, 2020, and found two profiles, A, and B. Here is how Action behavior is changed based on different settings when Advanced settings for Pass only 1st-degree connections plugin is installed:
  • Check for newly added contacts until: Previously added found (default option) - Linked Helper scrolls down till it finds the latest processed profile, which is profile B in our case, and only then it starts to compare profiles in the Queue against the profiles in My network page.
  • Check for newly added contacts until: First invite date - Linked Helper scrolls down till it finds any profile that accepted your invite at the date when the oldest profile in the Queue was invited - profile A in our case was invited on January 11, 2020, and only then it starts to compare profiles in the Queue against the profiles in My network page.

Important things to keep in mind:

  • Pass only 1st-degree connections action checks only those who are in the Queue of the Action, i.e. got there from the Successful list of the upper Action or were added there manually.
  • only those who accepted your invitation will be moved to the Successful list by Pass only 1st-degree connections action; those who did not accept your invitation are moved back to the Queue list (not Failed) of the action till the next run;
  • Pass only 1st-degree connections action works in cycles: it only checks who accepted your invitation every X minutes (60 by default) and moves them further. If no one was found, then most probably no invite was accepted;
  • Pass only 1st-degree connections action, unlike Invite 2nd and 3rd level contacts or Message to 1st connections | group members actions, does not visit each profile separately, it checks all the profiles from the Queue at once, yet triggering this Action very often may attract LinkedIn attention, that's why it's not possible to set timeout between checks to be less than 10 minutes;
  • with Automatic sent invites canceller for Pass only 1st-degree connections plug-in installed and enabled, Linked Helper removes pending invitations if profiles have not accepted your invite within specified amount of time (30 days by default). Once invitation is withdrawn, Linked Helper checks Queues of all Pass only 1st-degree connections actions and in case profile is found, moves the profile into the Failed list of the Action.

Troubleshooting

If you believe that Pass only 1st-degree connections action does not filter those who accepted your invitation, please:

  1. Find a couple of profiles who you believe were not filtered by the action and make sure they are your 1st-degree connections.
  2. Make sure those profiles are in the Queue of the Pass only 1st-degree connections action.
  3. Start the campaign and make sure Pass only 1st-degree connections action checks for newly added contacts at least once.
  4. Check whether those profiles you find in step 1 were processed by the action.

If those profiles are your 1st-degree connections and still in the Queue, please:

  • choose the First invite date option for Check for newly added contacts until setting;
  • go to the Successful list of Pass only 1st-degree connections action, select all profiles and move them back to the Queue;
  • try to run Pass only 1st-degree connections action again.

 

Here are some more useful articles from our blog:

 

You can try the software for free during 14 days - download it and activate a free trial.

Official website   Our blog   YouTube   Facebook   Instagram   WhatsApp   Email: info@linkedhelper.com

Related articles

Powered by Zendesk